Pro-Ject Antiskating súlyok

Pro-Ject

A lemezjátszók tartozékai | Súlyok

Replacement anti-skating weight with nylon line Original spare parts The weight is designed for Pro-Ject turntable arms The anti-skating weight is attached to a thin nylon line with a loop. This loop should be threaded onto the axle (located on the back of the arm on most Pro-Ject turntables) and hung over the metal line support* ...

Bővebben ID: 277757 EAN: 8595122701666

Állapot

Új

Elérhetőség

Készleten Utolsó darab

Ár

3 210 Ft

Elérhetőség

Készleten Utolsó darab

Replacement anti-skating weight with nylon line

Original spare parts
The weight is designed for Pro-Ject turntable arms

The anti-skating weight is attached to a thin nylon line with a loop. This loop should be threaded onto the axle (located on the back of the arm on most Pro-Ject turntables) and hung over the metal line support* (next to the arm) as shown in the illustration.

The weight is a direct replacement in case the original part is damaged or lost.

Weight of weight including line: 3.5 g

*Please note: Metal support for the line guide and other parts are not included in the price.

ANTI-SKATING SETTINGS ARE NOT INCLUDED.

Hook the loop on the end of the anti-skating weight line into the corresponding scale groove on the mandrel recommended pressure for your transmission and place the line over the support of the anti-skating mechanism so that the weight hangs down freely.

Adjust the anti-skating force by placing the weight thread in the appropriate groove (scale) of the mandrel. The lateral force on the spike (anti-skating) should be set in line with the vertical force on the spike (downforce) as follows: